BXVQK - SCOTCHCAST 4407 ENCAPSULATING AND BLOCKING COMPOUND
- MSDS: BXVQK
- Manufacturer: MINNESOTA MINING AND MFG CO TELCOMM PRODUCTS DIV
- Product Name: SCOTCHCAST 4407 ENCAPSULATING AND BLOCKING COMPOUND
- National Stock Number: 5975-01-017-5697
Product Identification
Product ID:SCOTCHCAST 4407 ENCAPSULATING AND BLOCKING COMPOUND
MSDS Date:06/15/1994
FSC:5975
NIIN:01-017-5697
Kit Part:Y
MSDS Number: BXVQK
Responsible Party
AUSTIN, TX 78769-2963
US
Emergency Phone: 512-834-1800
Info Phone: 512-834-1800
Cage: 55203
Contractor
Telephone: 800-426-8688
Cage: NO767
Ingredients
POLYOL
Fraction By Weight: 50%
PROPYLENE GLYCOL GLYCEROL TRIETHER
CAS: 25791-96-2
RTECS: MD0915000
Fraction By Weight: 55-65%
DITRIDECYL PHTHALATE
CAS: 119-06-2
RTECS: TI1950000
Fraction By Weight: 10-20%
N,N BIS-(2-HYDROXYPROPYL)-ANILINE
CAS: 3077-13-2
Fraction By Weight: 10-20%
DIPROPYLENE GLYCOL
CAS: 110-98-5
RTECS: UB8785000
Fraction By Weight: 5-10%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE-MILD IRRITATION. SKIN-MILD SKIN
IRRITANT. INHALATION-ALLERGIC RESPIRATORY REACTION, UPPER
RESPIRATORY IRRITATION. SWALLOWED-IRRITATION OF GASTROINTESTINAL
TISSUES. CHRONIC: SKINALLERGIC SKIN REACT ION. INHALATION-LUNG
DAMAGE.
Explanation of Carcinogenicity:C.I. SOLVENT YELLOW 3 IS APONTENTIAL
CANCER HAZARD. (NTP ANTICIPATED CARCINOGEN, IARC POSSIBLE HUMAN
CARCINOGEN)
Effects of Overexposure:EYE-REDNESS, SWELLING, PAIN AND TEARING.
SKIN-REDNESS, SWELLING AND ITCHING. BLISTERING.
INHALATION-DIFFICULTY BREATHING, WHEEZING, TIGHTNESS OF CHEST &
RESPIRATORY FAILURE. COUGHING, SNEEZING. CONGES TION & COUGHING UP
BLOOD. SWALLOWED-PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA,
BLOOD IN VOMITUS & BLOOD IN FECES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE-IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER. GET
MEDICAL AID. SKIN-IMMEDIATELY WASH SKIN WITH SOAP & WATER. REMOVE
SOILED CLOTHING. INHALATION-REMOVE PERSON TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS HARD, GET
IMMEDIATE MEDICAL AID. SWALLOWED-DRINK TWO GLASSES OF WATER. CALL A
PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:>270F,>132C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET, SELF-CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND
BREATHING APPARATUS, BUNKER COAT & PANTS, ARM BANDS, ETC.
Unusual Fire/Explosion Hazard:SEE HAZARDOUS DECOMPOSITION SECTION FOR
PRODUCTS OF COMBUSTION.
Accidental Release
Spill Release Procedures:CONTAIN SPILL. POUR ISOCYANATE DECONTAMINANT
SOLUTION ON SPILL & ALLOW TO REACT FOR 10 MIN. ALTERNATIVELY POUR
WATER ON SPILL AND ALLOW TO REACT FOR MORE THAN 30 MIN. COVER WITH
ABSORBENT. PLACE IN AP PROVED DRUM, BUT DO NOT SEAL FOR 24 HOURS.
Neutralizing Agent:SOLUTION(90% WATER, 8% CONCENTRATED AMMONIA, 2%
DETERGENT)
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN PREVENT
ALL SOURCES OF IGNITION.
Other Precautions:AVOID EYE CONTACT. AVOID SKIN CONTACT. AVOID
BREATHING OF VAPORS.
Exposure Controls
Respiratory Protection:SELECT ONE OF THE FOLLOWING NIOSH APPROVED
RESPIRATORS BASED ON AIRBORNE CONCENTRATIONS OF CONTAMINANTS AND IN
ACCORDANCE WITH OSHA REGULATIONS: HALF-MASK SUPPLIED AIR
RESPIRATOR.
Ventilation:IF EXHAUST VENTILATION IS NOT ADEUATE USE APPROPIATE
RESPIRATORY PROTECTION.
Protective Gloves:GLOVES NOT NORMALLY REUIRED.
Eye Protection:WEAR SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:GLOVES SHOULD BE WORN FOR CLEANUP OF SPILLS
OR LEAKSGE WHERE SKIN CONTACT IS POSSIBLE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING. DO
NOT INGEST.
Supplemental Safety and Health
KIT CONTAINS: PLASTIC MOLD BODY HALVES2, EPOXY RESIN PACKAGE 1,
ADHESIVE TAPE STRIP.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:N/D
Vapor Pres:0.00001
Vapor Density:8.5
Spec Gravity:1.01
Viscosity: 450 CPS
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER, OILY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS. REACTS WITH WATER, ALOCHOLS & AMINES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
OXIDES OF NITROGEN, HYDROGEN CYANIDE.
Disposal
Waste Disposal Methods:INCINERATE IN AN APPROVED INDUSTRIAL OR
COMMERCIAL FACILITY. DISPOSE OF COMPLETELY CURED (OR POLYMERIZED)
MATERIAL IN A SANITARY LANDFILL. DISPOSE OF EMPTY CANS IN A
SANITARY LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.